Able Label Systems


877-414-5867 or 509-242-9617


772-679-0374 (new)

About Us



 

Support

Printer & Software Sales and Support Contacts:

Phone: 877-414-5867 or 509-242-9617 Email: support@ablelabelsystems.com

Support Main

FAQ: How do I change the Datamax I-Class printer’s emulation to Prodigy Plus?
 

Answer:  

  1. On the front panel of your I-class printer, locate the MENU button and push it in once; You are now in the Menu System
  2. Scroll through the Menu System options by pushing the FWD Key (which is also the FEED button) until your display screen reads “SYSTEM SETTINGS”. Push the ENTER key (which is also the CANCEL button) once. You are now in the System Settings Menu.
  3. Scroll through the System Settings Menu options by pushing the FWD Key until your display screen reads “PLUS EMMULATION”. Push the ENTER key once.
  4. This setting should be “*DISABLED”, which is the default. Press the FWD key once to choose the option “ENABLE’. Press the ENTER key. (you should now see the *astricks next to ENABLED”.
  5. Push the MENU key 3 times to exit out of the menu’s. You will see an option to “SAVE CHANGES – YES”. Push ENTER.
    008
  6. Your display should now read “READY "

 

SUPPORT DOC#: 008
Printer
LAST UPDATED: 8/14/05

 

 

 Updated September 27, 2013