Able Label Systems


877-414-5867 or 509-242-9617


772-679-0374 (new)

About Us



 

Support

Printer & Software Sales and Support Contacts:

Phone: 877-414-5867 or 509-242-9617 Email: support@ablelabelsystems.com

Support Main

FAQ: How do I lower our Datamax I-Class printer’s default row adjustment to allow printing lower on the label?
 

Answer:  

  1. On the front panel of your I-Class (i.e. I-4208) printer, locate the MENU button and push it once; You are now in the Menu System
  2. Scroll through the Menu System options by pushing the FWD Key (which is also the FEED button) until the display reads “PRINT CONTROL”. Push the ENTER key (which is also the CANCEL button) once. You are now in the Print Control Menu.
  3. Scroll through the Print Control Menu options by pushing the FWD Key until the display reads “CUSTOM ADJUSTMENT”. Push the ENTER key once.
  4. Scroll through the Custom Adjustment Menu options by pushing the FWD Key until the display reads “ROW ADJUST”. Push the ENTER key once.
  5. The default setting is usually “*0”, but may have been changed. Press the FWD or REV key (which is also the PAUSE button) to set the row adjust at -20 . Press the ENTER key. (you should now see the * next to the –20 setting”.
  6. Push the MENU key 4 times to exit out of the menus. You will see an option to “SAVE CHANGES – YES”. Push ENTER.
  7. The display should now read “READY” and your settings have now been changed.

 

 Updated September 27, 2013